What solar street lights need to prevent in summer

For the control system of solar street lights, it is very important. The turning on and off of the light source of the street light needs to show a synchronized state with the change of the natural climate. For example, when the solar street light is used in summer, its controller needs to turn off the light when the weather is gray in the morning, and then once it is night. , Needs to be turned on at the right time. The solar street lamp is also a lighting facility that pursues a practical function. Its use has a certain demand for the battery’s power and duration. When the battery has completed charging protection and cannot draw power, the street lamp’s control system will be shut down in time. .

L001-90

1: With the arrival of summer, the storage of lithium batteries will also be affected by the sharp rise in temperature. If the capacity of lithium batteries cannot meet the requirements for use, they should be replaced in time to avoid affecting the normal operation of solar street lamps. Open the door at the bottom of the solar street lamp, take out the controller of the solar street lamp, and check if there is any tape falling off, bad contact, water leakage, etc. at the joint.

N765-1

2: Take corresponding measures to rectify and eliminate potential safety hazards as soon as possible. Summer rain is sufficient, although usually rainwater does not directly enter the lamppost, the evaporation of rainwater into steam will illuminate the short circuit of the line. During the rainy season, we should pay more attention to special situations, so it is necessary to prevent it from happening in the future.

3: In summer, the warm colors of street lights will make you more relaxed in the bathroom, and the cold colors will give you a sense of power. How to choose any random, the LED color of the street lights will normally choose the yellow light of warm colors, and it will not look dazzling. Require everyone to choose LED bulbs. Be sure to take a closer look at the ratio of the lumen value to the power consumption value, so that you can choose products with high brightness but low power consumption.

3

4: If there are extreme weather conditions in use, maintenance work must be done in a timely manner. Solar street light manufacturers introduce the influence of natural gas climate. Under such severe weather conditions, it is important for manufacturers to take timely measures to maintain street light battery components to prevent battery damage. In terms of its own business development, it is also very helpful.

5: The waterproof treatment of the lamp cap can ensure the service life of the street lamp, so the choice of the street lamp shell is very important when selecting, and we must pay attention to whether the style has waterproof performance. When installing the battery, it is necessary to bury the battery about 40 cm underground to avoid final flooding. The LED street lamp head should be tested to see if the street lamp is lit. If it is bright, it can be used.

6: The impact of trees has led many solar street light projects to follow the greening project. However, in the summer thunderstorm weather, the trees near the solar street lights are easily blown down by strong winds. The trees around the solar street lights should be trimmed regularly, especially when the plants grow wildly in summer, so ensuring the stable growth of the trees can reduce the damage caused by the dumping of the trees.

 

RS98-12


Post time: Jun-25-2020